This outboard delivers approx. 90-100lbs thrust. Will move a 14' Day Sailor 1000lbs at medium speed for a reasonable distance providing a distance does not exceed 2 miles without allowing the engine to rest 3-5 minutes to allow the engine to cool down completely.
This outboard is a trolling gas engine and is designed to propel a boat through the water intermittently.
Built To Last!
Meets CARB TIER II:
EPA stringent exhaust emission regulations.
To isolate tiller handle from engine housing.
The tiller handle has a built in throttle control, kill switch, isolating bushings to alleviate wrist fatigue while under way, plus a special feature “Lock In Trolling” mode for slow cruising.
Built to last, designed with steel friction pads, opposed to wearable fibrous type.
Hardened steel, heatproof bearings with side shields prevent moisture and corrosion.
Made of polypropylene, resist damage caused by rocks and shells.
Hardened chromoly steel, solid 7mm splined shaft on both ends for precision connection to the lower gear prop and clutch housing
Coil specifically designed to emit high voltage to the spark plug, which allows for easy engine starting.
Heavy steel gauge, glass packed, internal double noise dampening plate baffles, designed to improve annoying tinning muffler sound often found on 2 and 4 stroke air cooled engines.
We’ve included a plastic baffle between the carburetor air intake and air filter cover, this reduces engine noise and helps in preventing moisture from entering gas chamber and fouling spark plug.
Engine is equipped with additional cooling fins on the fly wheel to further dissipate heat from the cylinder head allowing the engine to run cooler.
Built with a safety release valve when closed, it also allows for secure transport, preventing accidental spills. Capacity - 27oz.
Lower Gear Case:
Packed with waterproof marine grease in place of gear oil, this allows it last for the life of the outboard, without replacement or maintenance.
Outer housing and gear case are made of aluminum and are powdered coated to withstand salt and brackish waters.
Solid chromoly shaft is supported by five bushings to minimize vibration, warping, lashing as well as wear and tear.
Strong lightweight universal mount, allows for tilt and trim as well as height adjustment for running in shallow water.*
*Custom extended shafts, are available upon request, at additional costs.
Outboard is shipped 98% assembled, and includes a tool kit.
Gas Powered 2.5 HP Trolling Motor Specifications:
Engine: 55cc's 2.5 HP
* Not for sale in the state of California.
* Colors may vary.
* Metal weights may vary from finished product to finished product; therefore there may be a weight difference of 2 lbs. - 4 lbs.
*This product is currently unavailable.
Weight: 18 lbs*
Speed: 4-5 mph /6-7 km
Range: 16" to 25"
Trolling Modes: 5 Tilting Options
Engine Type: 2 Cycle
Carburation: Primer Bulb Pulsating
Starting System: Recoil
Coil Type: CDI
Safety Switch: Remote Kill Switch
Fuel Mix: 24:1
Fuel Tank Capacity: 27 oz
Engine Make: BridgeStone
Drive System: Forward / Automatic Neutral
Clutch Type: Centrifugal Dry Pads
Cooling System: Air Cooled
Exhaust System: Air Vented
RPM Range: 2700 - 6000
Idle Speed in Forward: 800-1050
Turn Radius 360 Degree
Shaft Type: Solid
Propeller Type: Composite
Housing Material: Marine Grade Aluminum