Ends 09/24
140" L X 59" W Drive on Dock
Product Description
Dock, launch and enjoy more time on the water
The 140 x 59 inch drive-on dock gives compatible personal watercraft a dedicated docking platform with eight inline rollers to help with launching. A molded-in bow stop and tie-down loop support your docking setup, while the textured surface and walk-around space provide access for cleaning and routine watercraft care.
Rollers sit 3/4 inch above the rail line to help your watercraft move on and off the dock.
Molded-in bow stop, tie-down loop and a textured, non-skid surface.
Explore one- and two-dock arrangements with the appropriate mounting and linking hardware.
Confirm the fit before ordering: The dock measures 140 inches long by 59 inches wide and has a listed 1,400 lb weight capacity. Watercraft dimensions, hull shape and loaded weight all matter. Contact DirectBoats.com to confirm compatibility with your specific model and mounting location.
Dimensions & specifications
| Specification | Details |
|---|---|
| Length | 140" |
| Width | 59" |
| Height | 9.6" |
| Weight | 225 lbs |
| Weight Capacity | 1400 lbs |
Single-dock mounting options
Choose the mounting kit configuration above to match your installation. Configuration 1 supports side or front mounting; the Z-bracket arrangement in Configuration 2 is recommended for front mounting only. Mounting kits are optional selections.
| Configuration | Details |
|---|---|
| 1 |
|
| 2 |
|
Two-dock layout options
Planning two docks? Compare the hardware arrangements below, then confirm the required mounting and link kits with DirectBoats.com. The configuration numbers in this table describe two-dock layouts; confirm the correct kit selection before ordering.
| Configuration | Details |
|---|---|
| 1 |
|
| 2 |
|
| 3 |
|
Before you choose your dock
- Check the watercraft: Have its make, model, dimensions and loaded weight available when confirming fit.
- Choose the quantity: Select one or two docks in the options above.
- Plan the attachment: Review side- versus front-mount arrangements and the hardware required for your existing dock.
- Review delivery: Use the shipping estimator above for your location.
Questions & Answers about 140" L X 59" W Drive on Dock
- How does it work to get the boat out of the water once you drive the boat on to unit ?
- The drive on dock has rollers so you can just push it off.
- What weight will this dock support?
- 1400 lbs. How big is your jetski?
- Will this work with 16 foot fishing boat
- No it will not work. It will be too short.
- Hello. Is this floating dock will work for 13 feet Boston Whaler boat with 40 hp outboard engine? Thank you. Boris
- Hello Boris, yes, this floating dock will work for a 13-foot Boston Whaler with a 40 HP outboard. The weight capacity is 1,400 lbs, which should be sufficient for your boat, motor, and gear. Let us know if you have any other questions!
- Will this work for a 14' narrow Lone Star aluminum boat with a 20hp honda outboard
- No it will not work. The drive on dock is too short and will only accommodate boats up to 12'.
- do you offer a setup that would work with a 18' jon boat
- Our 17' x 90" drive on dock will work if you side mount it to your dock.
- How do I keep the dock from sticking to the lake bed when the water is low?
- Proper installation is key to ensuring your drive-on dock does not become lodged in the mud during low water periods. To achieve this, we recommend constructing a stable base with cinder blocks. The blocks should be laid as level as possible on the bottom. On a sloped surface, you can create a level plane by stacking blocks higher in the deeper section. An added benefit is that the blocks will eventually develop a slimy layer, which provides a protective cushion for the plastic dock.
- Will this work with my 15’ long Invader
- unfortunately these are made for PWCs,
- I have a 13 ft Gheenoe
- Unfortunately, these are made for PWCs. I am not sure if it will work with a Gheenoe.
