Floating Dock Kit

Our 6" lightweight low-profile bolt together frame utilizes self-squaring cross arms that provide support and make constructing the frame less time consuming. Simply add decking for ramps or stationary dock sections and floats for floating dock sections, and you are ready to install your system for what will become many years of reliable waterfront access. All products were designed with an emphasis on saving the customer time and money as they enjoy the simplicity, speed, and strength of this system.

Features:

Metal frame side sections come partially assembled with corners and cross braces.

Connect and tighten side sections together using a 9/16" wrench.

After tightening bolts, the frame will form a rigid box system.

For floating docks, evenly space floats from outside edge to center.

Attach float drums to one side of the frame using the included self-drilling/tapping fasteners (four fasteners per float).

Once you have securely attached the floats, flip the dock section over, and it's ready for decking.

Decking attaches directly to the metal frame by self-drilling/tapping screws.

A heavy-duty electric drill is recommended for float and decking installation.


TOOLS NEEDED:Tape measure, C-Clamps, 9/16" wrench for frame bolts, drill with #3 Square head drive for decking, and drill with 3/8" socket for float fasteners.

---

Floating Dock Kit Specifications:
13 Gauge USA Steel
3/16" Hardware
3/8" Bolts
*Decking not included

---

Assembly Required!